Sign In | Join Free | My burrillandco.com |
|
Ask Lasest Price | |
Brand Name : | SUNHOUSE |
Payment Terms : | L/C, T/T |
Delivery Time : | 4-8 |
The role and advantages of 50# ceiling system:
1.Covering and decorative role
Inside the house, air conditioning ducts, electric wire ducts, etc.
usually go to the ceiling. Installing ceiling can cover and play a
decorative role
2.Separation of space
Use the different design of the ceiling to distinguish the space
location of the living room and dining room, and play a role as a
partition between the two functional areas
3.Soundproof, heat insulation, waterproof function
Because the ceiling material has the characteristics of sound
insulation, soundproof and waterproof, etc.: after the installation
of the ceiling is equivalent to adding a layer of protection
Accessory | Specification | Ratio | Package | |||||
Height mm | Width mm | Thickness mm | Length mm | Weight kg | Volume m3 | |||
50# Card Bone | 30 | 18 | 0.7 | 3000 | 0.000756 | 1 square / 1 meter | 20pcs/tie | |
35 | 18 | 0.8 | 3000 | 0.000945 | 1 square / 1 meter | 20pcs/tie | ||
38 | 18 | 1 | 3000 | 0.001026 | 1 square / 1 meter | 20pcs/tie | ||
50# Sub keel | 17 | 50 | 0.4 | 3000 | 0.001275 | 1 square / 3 meter | 20pcs/tie | |
17 | 50 | 0.5 | 3000 | 0.001275 | 1 square / 3 meter | 20pcs/tie | ||
19 | 50 | 0.5 | 3000 | 0.001425 | 1 square / 3 meter | 20pcs/tie | ||
19 | 50 | 0.6 | 3000 | 0.001425 | 1 square / 3 meter | 20pcs/tie | ||
Edge keel | 20 | 30 | 0.4 | 3000 | 0.0009 | 1 square/0.2pcs | 20pcs/tie | |
25 | 25 | 0.4 | 3000 | 0.0009375 | 1 square/0.2pcs | 20pcs/tie | ||
Top burst | φ8 | 1 square/set | ||||||
Spreader bar | 6,8,10,12 | 3000 | 1 square / 1 meter | |||||
Nut | φ8 | 1 square/ 3 pcs | ||||||
Self-tapping screws | 3.5*50 | 40 square/box | 20 boxes/case | |||||
3.5*35 | 40 square/box | 20 boxes/case | ||||||
Spreader bar joint | φ8 | |||||||
Putty powder | 20 | 10 square/pack | 1pack/20kg | |||||
Gypsum adhesion powder | ||||||||
Webbing | 46 | 50m | ||||||
46 | 75m |
1.Main Runners: These are long, straight tracks that run parallel
to each other and are typically suspended from the building
structure.
2.Cross Tees: These are shorter tracks that run perpendicular to
the main runners and provide support for the ceiling tiles.
3.Wall Angles: These are used to connect the grid system to the
walls and provide additional stability.
4.Hangers: Hangers are used to suspend the main runners from the
building structure.
5.Clips and Connectors: These are used to secure the cross tees and
wall angles to the main runners and ensure a stable and secure
connection.
6.Ceiling Grid Caps: These are used to cover the ends of the main
runners and provide a finished look.
7.Suspension Wire: This is used to hang the main runners from the
building structure.
It is important to choose components that are compatible with each
other and suitable for the specific application to ensure a safe
and effective installation. It is also important to ensure that the
grid system is installed correctly to provide adequate support for
the ceiling tiles and any other components, such as light fixtures
and ventilation systems, that may be incorporated into the system.
These are just a few examples of the many applications for suspended ceilings. The specific use of a suspended ceiling will depend on the requirements of the specific space and the goals of the project.
1.Plan and Measure: Measure the ceiling area and plan the layout of
the grid system, including the placement of main runners, cross
tees, and wall angles.
2.Locate Studs and Joists: Determine the location of the building's
structural supports, such as studs and joists, so that the hangers
can be attached securely.
3.Install Main Runners: Suspend the main runners from the building
structure using hangers and suspension wire. Ensure that the main
runners are level and spaced evenly apart.
4.Install Cross Tees: Snap the cross tees into the main runners and
secure them in place with clips or connectors.
5.Install Wall Angles: Attach the wall angles to the walls and the
main runners to provide stability and support for the grid system.
6.Install Ceiling Grid Caps: Cover the exposed ends of the main
runners with ceiling grid caps to provide a finished look.
7.Install Ceiling Tiles: Place the ceiling tiles into the grid
system, making sure they are securely fastened in place.
![]() |