Light Steel Keel Gypsum Board Ceiling System is a modern and
popular type of suspended ceiling system that is widely used in
commercial and residential buildings. This system consists of a
lightweight steel frame that is suspended from the main structural
ceiling by using adjustable steel hangers. The steel frame is then
covered with gypsum board panels to create a smooth and attractive
ceiling surface.
The main advantage of this type of ceiling system is its
flexibility and adaptability. The lightweight steel framework is
easy to install, and it can be easily adjusted to fit any room or
ceiling height. The gypsum board panels that form the visible
ceiling surface can also be easily replaced or removed, allowing
for easy access to the space above the ceiling for maintenance or
repairs.
| Accessories | Specification(mm) | Unit | Dosage |
| Height
(mm) | Width
(mm) | Thickness
(mm) | Length
(mm) |
| Main Channel | 27 | 60 | 1.2 | 3000 | M | 1m/Sqm |
| 27 | 60 | 1.1 | 3000 | M | 1m/Sqm |
| 27 | 60 | 1 | 3000 | M | 1m/Sqm |
| Vice Channel | 27 | 60 | 0.8 | 3000 | M | 3m/Sqm |
| 27 | 60 | 0.7 | 3000 | M | 3m/Sqm |
| 27 | 60 | 0.6 | 3000 | M | 3m/Sqm |
| 27 | 60 | 0.5 | 3000 | M | 3m/Sqm |
| Wall Angle | 20 | 27 | 0.5 | 3000 | PCS | 0.2pcs/Sqm |
| Sleeve Anchor | | | φ8 | | SET | 1set/Sqm |
| Thread Rod | | | φ6/8/10/12 | 3000 | M | 1m/Sqm |
| Nut | | | φ8 | | PCS | 3pcs/Sqm |
| Drywalll Screw | 3.5*50 | | | Box | 1 box/40Sqm |
| 3.5*35 | | | Box | 1 box/40Sqm |
| Hanger | / | PCS | 1 pcs/Sqm |
| Conneting Clip | / | PCS | 2 pcs/Sqm |
| Putty Powder | 20kgs/bag | BAG | 1bag/10Sqm |
| Joint Compound | 25kgs/bucket | Bucket | 0.2bucket/Sqm |
| Paper Joint Tape | 46*50000 | Roll | 1Roll/9Sqm |
| 46*75000 | Roll | 1Roll/13Sqm |
Main Runner: The main runner is the primary T-shaped component that runs along
the length of the ceiling. It is used to support the cross tees and
the ceiling tiles.
Cross Tee: The cross tee is a T-shaped component that connects to the main
runner to form a grid pattern. It is used to support the ceiling
tiles.
Wall Angle: The wall angle is an L-shaped component that is used to create a
perimeter around the ceiling. It is attached to the walls and
provides a surface for the ceiling tiles to rest on.
Hanger: The hanger is a metal wire that is used to suspend the main
runners from the ceiling or the roof structure. It is attached to
the main runner using a clip or a hook.
Clip: The clip is a metal component that is used to connect the main
runner to the hanger wire. It is inserted into the slot on the main
runner and attached to the hanger wire.
Hook: The hook is a metal component that is used to connect the main
runner to the hanger wire. It is inserted into the hole on the main
runner and attached to the hanger wire.
The German type ceiling system is a type of suspended ceiling
system that is commonly used in commercial and residential
buildings. It consists of a metal grid that is suspended from the
ceiling, and ceiling tiles that are placed within the grid.
To install a German type ceiling system, the following steps should
be taken:
Measure the area where the ceiling system will be installed to
determine the amount of materials needed.
Mark the ceiling for the location of the grid system.
Install the perimeter molding around the ceiling.
Install the hanger wires to suspend the main runners of the grid
system from the ceiling.
Install the main runners of the grid system.
Install the cross tees of the grid system.
Place the ceiling tiles into the grid system.
Install the lighting fixtures and any other necessary accessories.
With strong flexibility, easy construction and simple maintenance,
the ceiling system can meet various interior decoration needs and
provide diverse design solutions and decorative effects. It can be
used to improve the light, acoustics, heat insulation, thermal
insulation, fireproofing and other properties of indoor spaces,
while also hiding pipes, wiring, equipment and other cluttered
indoor facilities, beautifying the indoor environment and improving
the comfort of use.
Product Display
China Plasterboard Ceiling System is suitable for interior decoration of various buildings, such as
residential, commercial offices, hotels, hospitals, schools,
airports and other public buildings, as well as industrial
buildings such as factories and warehouses. The system can be used
for interior decoration of new buildings, as well as for renovation
and remodeling of old buildings.
