Reinforced Glass Fiber Gypsum Board 12.5mm Gypsum Durable Fiberglass Plasterboard

Product Description

Glass fiber reinforced gypsum board (GFRG) is a construction panel product made from calcined gypsum, plaster. Produced under strictly controlled conditions, the panels are 124 mm thick, 12 m long and 3 m high, contain cavities and can be unfilled, partially filled or fully filled with reinforced concrete, depending on structural requirements. Experiments and studies in Australia, China and India have shown that GFRG panels, properly filled with plain reinforced concrete, have considerable strength and can be used not only as load-bearing elements but also as shear walls, capable of resisting lateral loads caused by earthquakes and wind.GFRG panels can also be used as infill (non-load-bearing) in combination with columns and beams of RCC frames (conventional frame construction for multi-story buildings). There is no restriction on the number of storeys, and the micro-beams and RCC mortar (acting on T-beams) can be used as floor/roof slabs.

Product Features

GFRG panel possesses high flexural strength, shearing strength, compressive strength, and flexibility. It has a very high level of resistance to fire, water, heat, corrosion, rot, and termites. Concrete filled with vertical reinforcement rods improves it’s vertical and lateral load capacities. GFRG made buildings are resistant to fire, earthquakes, and cyclones.

Product Parameters

Product Appliction

Glass Fiber Reinforced Gypsum (GFRG or GRG) is the most economical Formglas material and is used in a range of architectural applications such as ceilings, column covers, decorative wall panels, domes, bulkheads, light coves, and more.

• Decorative elements: GFRG boards can be used to create decorative elements such as cornices, moldings, and medallions. They can be easily molded into various shapes and sizes.
• Bathroom and kitchen walls: GFRG boards are resistant to moisture and are often used in bathrooms and kitchens to create durable and water-resistant walls.
• Exterior cladding: GFRG boards can be used as an alternative to traditional exterior cladding materials such as brick, stone, or concrete. They are lightweight, durable, and easy to install.

Packaging&Shipping

Located in Guangdong Province，Foshan Huiju Decoration Material Co.,Ltd. was established in 1993. It is a professional company that specializes in one stop solution for (Gypsum bord/cement board/WPC)ceiling and partition wall system. Our Brand is SUNHOUSE and mainly products：gypsum board, fiber cement board, pvc gypsum tile，wpc wall panel and light steel keel. These products are widely used in construction project and indoor decoration.

After 30 years development, our factory cover an area of 8000 square meters, there are 2 R&D teams, 12 skilled trade salesman, and over 100 workers in our factory. With 8 automatic production lines, our monthly capacity reach 300 thousand square meter, which could fully meet customer’s request.

We have more than 50 thousand square meter products in stock，so we accpet urgent orders and the lead time can short to 7days. Free samples are avaliable and the delivery is very fast. We can also provide certificate such as FSC，CARB，CE，etc.